Products

Mineral acid-based degreaser and cleaner with an inhibitory effect for galvanising plants.

Suitable for general use in removing oils, greases and waxes from metal surfaces.

Highly concentrated cleaner which, thanks to its high concentration of active ingredients, delivers excellent cleaning performance at low dosages, making it particularly economical to use.
Temperature range 10–40°

Pickling, degreasing and inhibitor agent for hydrochloric acid solutions

Highly effective cleaner with a simultaneous inhibiting effect. For pickling and cleaning high-strength steels (HV bolts of strength class 10.9)
Temperature range up to 60°

Pickling and degreasing agent for hydrochloric acid solutions

Highly effective degreaser with a simultaneous inhibiting effect.
Temperature range 10–50°

Mineral acid-based degreaser and cleaner with an inhibiting effect for galvanising plants

Can be used universally for removing oils, greases and waxes from metal surfaces.
Temperature range 10–30°

Alkaline immersion degreaser for the galvanising industry.

HEGALCLEAN 135 AZ® is a white, alkaline powder that removes a wide variety of contaminants from steel surfaces. It has good dispersing properties for the removal of particulate dirt.
Temperature range 35–80°

For immersion degreasing of steel prior to galvanizing — emulsifying

HEGACLEAN 136 T® is used in combination with caustic soda solution.
Temperature range: 40–80°

Inhibitor for Hydrochloric Acid Pickling at Temperatures Up to 90°C

Highly effective inhibitor for protecting metal surfaces during pickling in hydrochloric acid baths at elevated temperatures.

Inhibitor for hydrochloric acid up to 50°C — free from hexamethylenetetramine and thiourea

Highly effective inhibitor for protecting metal surfaces during pickling in hydrochloric acid baths.

Pickling activator for hydrochloric and sulphuric acid.

Reduction of hydrochloric acid vapours and inhibitor in pickling baths up to 45°C

Reduces the release of hydrochloric acid vapours into the atmosphere during the pickling of steel components in hydrochloric acid solutions.

For acidic to slightly alkaline systems — free from silicone and siloxanes

Defoamer 10 is particularly suitable for foam suppression in aqueous systems (pH range 1–11).

Flux for hot-dip galvanising — suitable for galvanising individual pieces, small parts, tubes and wire

Premium flux for hot-dip galvanising — suitable for galvanising individual items, small parts, pipes and wire

Acid-binding flux for hot-dip galvanising — used to restore the flux bath

Premium acid-neutralising flux for hot-dip galvanising — used to restore the flux bath

Innovative flux for continuous iron removal and pH control

Iron-precipitating and acid-binding flux for hot-dip galvanising — suitable for galvanising bars, tubes and small parts; used for continuous re-sharpening

Special flux, suitable for use with zinc melts containing high levels of aluminium (Al 0.01%–0.2%)

Special flux, particularly suitable for use with conventional flux recycling systems.

Special flux, particularly suitable for the galvanising of small parts at a high drying temperature (180°C)

Special additive for flux; optimises the dipping process into the molten zinc; reduces smoke emission.

Special flux for the hot-dip galvanising process.

Wetting agents for flux baths in galvanising plants

Kebosol FB is a highly effective surfactant which reduces the surface tension of even highly concentrated flux solutions.

White Rust Protector, anti-corrosion agent

is used for the post-treatment of galvanised parts. It is an anti-corrosion agent that temporarily prevents the formation of white rust. This helps to preserve the light silvery sheen of freshly galvanised surfaces for longer. It can be used for the post-treatment of galvanised wire.

Temporary protection based on trivalent chromium.

Cr(III)-based passivation, Cr(VI)-free

Master zinc/nickel alloy – up to 10 per cent reduction in zinc usage!

Zinc alloy with an optimised content of tin, bismuth and aluminium

Special alloy for the conversion of zinc baths.

Zinc-aluminium alloy, available in various aluminium contents

DAP nickel powder for precise control of the nickel content using the direct alloying process (DAP)

Product for purging zinc baths

Used to purify zinc melts. Dissolves the metal oxides contained in the zinc melt through reduction. Improves the wettability of the molten zinc and its resistance to white rust.

Product for processing zinc ash

Used to smelt zinc from the zinc ash produced during hot-dip galvanising. 55–65 per cent zinc recovery from the ash.

Lead-free repair solder for galvanising defects.

Zinc spray for corrosion protection (400ml).

Disposal of filter dust from galvanising plants

Recycling of used flux solutions

Disposal / recycling of acidic substances