𝐆𝐚𝐥𝐯𝐚𝐧𝐢𝐳𝐢𝐧𝐠 𝐏𝐫𝐨𝐜𝐞𝐬𝐬 𝐈𝐧𝐬𝐢𝐠𝐡𝐭𝐬 by Herwig GmbH
𝑃𝑖𝑚𝑝𝑙𝑒𝑠 - 𝑡ℎ𝑒𝑟𝑚𝑜𝑑𝑦𝑛𝑎𝑚𝑖𝑐𝑠 𝑎𝑡 𝑤𝑜𝑟𝑘 𝑖𝑛 𝑔𝑎𝑙𝑣𝑎𝑛𝑖𝑧𝑖𝑛𝑔

Beginning of week.
Morning shift started preparing everything for the scheduled production, full capacity.

First jig, comes in, into zinc. Some pimples, scattered.
Second jig, comes. More pimples - it is getting worse.
Third jig, not a single piece will be accepted, the defect is too intense!
Production comes to an halt. What changed for this to happen?

Pimples, sometimes also called floating dross, can appear suddenly and disappear just as quickly; yet, the real challenge begins when becomes part of daily production rather than some isolated episode.

Several factors can contribute or intensify this galvanizing defect:

• Zinc bath chemistry, namely iron content
• Working temperature and heating control
• Aluminium and Nickel concentration
• Melting of zinc and alloys
• Iron in flux, salt balance and drying
• Ash and dross management
• Skimming practices
• Material geometry

Pimples result from the interaction of pre-treatment, zinc bath conditions and operation in the process, and rarely are the problem themselves. They are the symptom of something in the process that has drifted away from its optimal operating conditions.

𝐻𝑒𝑟𝑤𝑖𝑔 𝐺𝑚𝑏𝐻 𝑠𝑢𝑝𝑝𝑜𝑟𝑡𝑠 𝑡ℎ𝑒 ℎ𝑜𝑡 𝑑𝑖𝑝 𝑔𝑎𝑙𝑣𝑎𝑛𝑖𝑧𝑖𝑛𝑔 𝑖𝑛𝑑𝑢𝑠𝑡𝑟𝑦 𝑤𝑖𝑡ℎ 𝑙𝑜𝑛𝑔-𝑡𝑒𝑟𝑚 𝑔𝑙𝑜𝑏𝑎𝑙 𝑒𝑥𝑝𝑒𝑟𝑖𝑒𝑛𝑐𝑒 𝑎𝑛𝑑 𝑎 ℎ𝑎𝑛𝑑𝑠-𝑜𝑛 𝑎𝑝𝑝𝑟𝑜𝑎𝑐ℎ 𝑎𝑐𝑟𝑜𝑠𝑠 𝑡ℎ𝑒 𝑐𝑜𝑚𝑝𝑙𝑒𝑡𝑒 𝑝𝑟𝑜𝑐𝑒𝑠𝑠.

Do you have a checklist of 𝒔𝒚𝒎𝒑𝒕𝒐𝒎𝒔 to be evaluated when pimples start to prevail? Or do you wait until them 𝒇𝒂𝒅𝒆 𝒂𝒘𝒂𝒚?

INDIAN bizz partner welcome!

𝐆𝐚𝐥𝐯𝐚𝐧𝐢𝐳𝐢𝐧𝐠 𝐏𝐫𝐨𝐜𝐞𝐬𝐬 𝐈𝐧𝐬𝐢𝐠𝐡𝐭𝐬 by Herwig GmbH
𝑍𝑖𝑛𝑐 𝑡𝑜 𝑎𝑠ℎ𝑒𝑠... 𝑚𝑜𝑛𝑒𝑦 𝑡𝑜 𝑑𝑢𝑠𝑡

Ash generation in hot dip galvanizing is inevitable but excessive generation is not. The difference lies in a few critical process parameters:

• Is there a dedicated drying equipment?
• The material is properly dried before entering the zinc bath?
• Does flux have the proper strength and about the ratio and iron content?
• Are the kettle workers trained and equipped to skim the zinc bath efficiently?
• How adequated is jigging for the geometry of material?

Every single bullet above influences how much zinc ends up on the steel... and how much ends up as ash.

Reducing ash generation is, therefore, not about a single aspect - is about controlling the process as a whole.

𝐻𝑒𝑟𝑤𝑖𝑔 𝐺𝑚𝑏𝐻 𝑠𝑢𝑝𝑝𝑜𝑟𝑡𝑠 𝑡ℎ𝑒 ℎ𝑜𝑡 𝑑𝑖𝑝 𝑔𝑎𝑙𝑣𝑎𝑛𝑖𝑧𝑖𝑛𝑔 𝑖𝑛𝑑𝑢𝑠𝑡𝑟𝑦 𝑤𝑖𝑡ℎ 𝑙𝑜𝑛𝑔-𝑡𝑒𝑟𝑚 𝑔𝑙𝑜𝑏𝑎𝑙 𝑒𝑥𝑝𝑒𝑟𝑖𝑒𝑛𝑐𝑒 𝑎𝑛𝑑 𝑎 ℎ𝑎𝑛𝑑𝑠-𝑜𝑛 𝑎𝑝𝑝𝑟𝑜𝑎𝑐ℎ 𝑎𝑐𝑟𝑜𝑠𝑠 𝑡ℎ𝑒 𝑐𝑜𝑚𝑝𝑙𝑒𝑡𝑒 𝑝𝑟𝑜𝑐𝑒𝑠𝑠.

Do you know how much zinc leaves your kettle through ash everyday? 📊

Available 24/7 – supporting the hot-dip galvanizing industry whenever you need us.

𝐆𝐚𝐥𝐯𝐚𝐧𝐢𝐳𝐢𝐧𝐠 𝐏𝐫𝐨𝐜𝐞𝐬𝐬 𝐈𝐧𝐬𝐢𝐠𝐡𝐭𝐬 by Herwig GmbH
𝑇ℎ𝑒 𝑐ℎ𝑎𝑙𝑙𝑒𝑛𝑔𝑒 𝑜𝑓 𝑡ℎ𝑒 𝑠𝑡𝑒𝑒𝑙 𝑐ℎ𝑒𝑚𝑖𝑠𝑡𝑟𝑦

For the average galvanizer, steel chemistry is one of the driving forces concerning output and quality of galvanizer material. It's chemical composition, particularly Silicon and Phosphorous content, dramatically influence the growht of intermetallic Zinc-Iron layers during the galvanizing process.

The phenomenon of Sandelin and Sebisty ranges is well documented and when a particular material falls within these, the outcome unveils:

• excessive coating thickness
• rough coating appearance
• increased zinc consumption...
• ...with greater variability between seemingly similar batches

The more reactive the steel, the more important is becomes to adapt process parameters to antecipate the coating behaviour - Nickel alloying is the first line of action, whereas further adjusting the zinc melt composition, dipping times, temperature or even jigging efficiency, the following points to act upon.

Understanding and controlling steel reactivity is not only a quality issue but also a matter of process control, cost efficiency and customer satisfaction.

𝐻𝑒𝑟𝑤𝑖𝑔 𝐺𝑚𝑏𝐻 𝑠𝑢𝑝𝑝𝑜𝑟𝑡𝑠 𝑡ℎ𝑒 ℎ𝑜𝑡 𝑑𝑖𝑝 𝑔𝑎𝑙𝑣𝑎𝑛𝑖𝑧𝑖𝑛𝑔 𝑖𝑛𝑑𝑢𝑠𝑡𝑟𝑦 𝑤𝑖𝑡ℎ 𝑙𝑜𝑛𝑔-𝑡𝑒𝑟𝑚 𝑔𝑙𝑜𝑏𝑎𝑙 𝑒𝑥𝑝𝑒𝑟𝑖𝑒𝑛𝑐𝑒 𝑎𝑛𝑑 𝑎 ℎ𝑎𝑛𝑑𝑠-𝑜𝑛 𝑎𝑝𝑝𝑟𝑜𝑎𝑐ℎ 𝑎𝑐𝑟𝑜𝑠𝑠 𝑡ℎ𝑒 𝑐𝑜𝑚𝑝𝑙𝑒𝑡𝑒 𝑝𝑟𝑜𝑐𝑒𝑠𝑠.

𝗔𝗿𝗲 𝘆𝗼𝘂 𝗶𝗻 𝗰𝗼𝗻𝘁𝗿𝗼𝗹 𝗼𝗳 𝘁𝗵𝗲 𝗰𝗼𝗮𝘁𝗶𝗻𝗴 🧐 ... 𝗼𝗿 𝗶𝘀 𝘁𝗵𝗲 𝘀𝘁𝗲𝗲𝗹 𝗰𝗵𝗲𝗺𝗶𝘀𝘁𝗿𝘆 𝗰𝗼𝗻𝘁𝗿𝗼𝗹𝗹𝗶𝗻𝗴 𝗶𝘁? 💸 💸 💸

At your disposal for whatever galvanizing needs 😁

#herwig #galvanizing #thegalvanizingspecialists

𝐆𝐚𝐥𝐯𝐚𝐧𝐢𝐳𝐢𝐧𝐠 𝐏𝐫𝐨𝐜𝐞𝐬𝐬 𝐈𝐧𝐬𝐢𝐠𝐡𝐭𝐬 by Herwig GmbH
𝐹𝑒𝑟𝑟𝑢𝑚 𝑎𝑘𝑎 𝐹𝑒𝑟 𝑎𝑘𝑎 𝐸𝑖𝑠𝑒𝑛 𝑎𝑘𝑎 𝐹𝑒𝑟𝑟𝑜 𝑎𝑘𝑎 𝐼𝑟𝑜𝑛

The impact of iron in hot dip galvanizing process is seldom understimated. Yet it directly influences:

• performance of degreasing
• performance and speed of pickling
• properties and effectiveness of flux
• ash and dross generation
• ultimately, gross zinc consumption

Iron follows a straight path throughout the entire galvanizing process.
As pickling progresses, dissolved iron accumulates in the acid. Part of it is then transferred to the flux, affecting its chemistry and performance. Eventually, iron reaches the zinc bath, where it contributes to ash and dross formation and influences both process efficiency and operating costs.

Some grams of Fe can easily become kg of generated dross.

This is why iron should be considered also a process indicator.
Monitoring iron levels throughout the process provides valuable insight into acid efficiency, flux condition, zinc bath behaviour and overall process stability. In many cases, controlling iron means controlling costs.

𝐻𝑒𝑟𝑤𝑖𝑔 𝐺𝑚𝑏𝐻 𝑠𝑢𝑝𝑝𝑜𝑟𝑡𝑠 𝑡ℎ𝑒 ℎ𝑜𝑡 𝑑𝑖𝑝 𝑔𝑎𝑙𝑣𝑎𝑛𝑖𝑧𝑖𝑛𝑔 𝑖𝑛𝑑𝑢𝑠𝑡𝑟𝑦 𝑤𝑖𝑡ℎ 𝑙𝑜𝑛𝑔-𝑡𝑒𝑟𝑚 𝑔𝑙𝑜𝑏𝑎𝑙 𝑒𝑥𝑝𝑒𝑟𝑖𝑒𝑛𝑐𝑒 𝑎𝑛𝑑 𝑎 ℎ𝑎𝑛𝑑𝑠-𝑜𝑛 𝑎𝑝𝑝𝑟𝑜𝑎𝑐ℎ 𝑎𝑐𝑟𝑜𝑠𝑠 𝑡ℎ𝑒 𝑐𝑜𝑚𝑝𝑙𝑒𝑡𝑒 𝑝𝑟𝑜𝑐𝑒𝑠𝑠.

How many times did you had your flux behaving like this? 😳 And can you notice a trend there? 👇🧐

𝐆𝐚𝐥𝐯𝐚𝐧𝐢𝐳𝐢𝐧𝐠 𝐏𝐫𝐨𝐜𝐞𝐬𝐬 𝐈𝐧𝐬𝐢𝐠𝐡𝐭𝐬 by Herwig GmbH
𝐸𝑢𝑟𝑜𝑝𝑒 𝑎𝑛𝑑 𝑡ℎ𝑒 𝑐ℎ𝑎𝑙𝑙𝑒𝑛𝑔𝑒 𝑜𝑓 𝑟𝑒𝑔𝑢𝑙𝑎𝑡𝑖𝑜𝑛𝑠

European industry has long been a benchmark for quality, safety and environmental standards but particularly to hot dip galvanizing industry, keeping pace with an increasingly complex regulatory framework has become a challenge of its own.

From chemical management (RoHS, REACH) and emissions control (IED) to worker safety, waste handling and energy efficiency requirements (Net Zero Industry Act, BREF/BAT Conclusions), galvanizers are continuously required to adapt their operations. Compliance is no longer just a legal obligation - it has become a key operational parameter.

One area where this challenge is particularly visible is (hydrochloric acid) pickling. As one of the most critical stages of pre-treatment, pickling directly impacts coating quality, process efficiency and operational cost. At the same time, stricter requirements regarding acid emissions, waste streams and worker exposure are increasing the complexity of managing this essential process step.

This means that European galvanizers are expected to deliver higher environmental performance while maintaining productivity, quality and competitiveness in an increasingly demanding market.

𝐻𝑒𝑟𝑤𝑖𝑔 𝑠𝑢𝑝𝑝𝑜𝑟𝑡𝑠 𝑡ℎ𝑒 ℎ𝑜𝑡 𝑑𝑖𝑝 𝑔𝑎𝑙𝑣𝑎𝑛𝑖𝑧𝑖𝑛𝑔 𝑖𝑛𝑑𝑢𝑠𝑡𝑟𝑦 𝑤𝑖𝑡ℎ 𝑙𝑜𝑛𝑔-𝑡𝑒𝑟𝑚 𝑔𝑙𝑜𝑏𝑎𝑙 𝑒𝑥𝑝𝑒𝑟𝑖𝑒𝑛𝑐𝑒 𝑎𝑛𝑑 𝑎 ℎ𝑎𝑛𝑑𝑠-𝑜𝑛 𝑎𝑝𝑝𝑟𝑜𝑎𝑐ℎ 𝑎𝑐𝑟𝑜𝑠𝑠 𝑡ℎ𝑒 𝑐𝑜𝑚𝑝𝑙𝑒𝑡𝑒 𝑝𝑟𝑜𝑐𝑒𝑠𝑠.

This brings the question: 𝗶𝘀 𝗘𝘂𝗿𝗼𝗽𝗲𝗮𝗻 𝗿𝗲𝗴𝘂𝗹𝗮𝘁𝗶𝗼𝗻 𝘀𝘁𝗿𝗲𝗻𝗴𝗵𝘁𝗲𝗻𝗶𝗻𝗴 𝘁𝗵𝗲 𝗰𝗼𝗺𝗽𝗲𝘁𝗶𝘁𝗶𝘃𝗲𝗻𝗲𝘀𝘀 𝗼𝗳 𝗴𝗮𝗹𝘃𝗮𝗻𝗶𝘇𝗲𝗿𝘀... 𝗼𝗿 𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝘁𝗵𝗲𝗺 𝗮𝘁 𝗮 𝗱𝗶𝘀𝗮𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲 𝗮𝗴𝗮𝗶𝗻𝘀𝘁 𝗰𝗼𝗺𝗽𝗲𝘁𝗶𝘁𝗼𝗿𝘀 𝗶𝗻 𝗹𝗲𝘀𝘀 𝗿𝗲𝗴𝘂𝗹𝗮𝘁𝗲𝗱 𝗺𝗮𝗿𝗸𝗲𝘁𝘀? 🤔 🤔 🤔

#herwig #galvanizing #Europe #GPIseries

Herwig team fresh update from EGGA - Galvanizing Europe Istanbul event

#herwig #galvanizing #istanbul2026

Come and meet the Herwig Team in Istanbul

𝐆𝐚𝐥𝐯𝐚𝐧𝐢𝐳𝐢𝐧𝐠 𝐏𝐫𝐨𝐜𝐞𝐬𝐬 𝐈𝐧𝐬𝐢𝐠𝐡𝐭𝐬 by Herwig GmbH
𝑆𝑚𝑎𝑙𝑙 𝑎𝑑𝑑𝑖𝑡𝑖𝑜𝑛𝑠 𝑡ℎ𝑎𝑡 𝑚𝑎𝑘𝑒 𝑎𝑛 𝑖𝑚𝑝𝑎𝑐𝑡

Zinc has been the foundation of hot dip galvanizing since the very beginning of the industry. Without it, the process simply does not exist but at the same time, zinc also represents one of the most significant operational costs in galvanizing.

Melting at 419 ºC as pure element, the galvanizing bath is rarely composed of zinc alone - Al, Fe, Ni, Pb, Bi, Sn, Cu - either as impurities or alloying elements to support the process. Together, they can reduce viscosity, improve dross cleaning, reduce frequent quality defects, adjust coating thickness and even ensure a long kettle life, or... do the exact opposite.

That is why frequent and consistent control of the zinc bath is essential.
It provides real visibility over the metallurgical melt and allows informed decisions regarding zinc and alloy additions.
When additions are carried out correctly and consistently, the result is clear:
better coating quality, improved process stability and lower operational cost.

𝐻𝑒𝑟𝑤𝑖𝑔 𝑠𝑢𝑝𝑝𝑜𝑟𝑡𝑠 𝑡ℎ𝑒 ℎ𝑜𝑡 𝑑𝑖𝑝 𝑔𝑎𝑙𝑣𝑎𝑛𝑖𝑧𝑖𝑛𝑔 𝑖𝑛𝑑𝑢𝑠𝑡𝑟𝑦 𝑤𝑖𝑡ℎ 𝑙𝑜𝑛𝑔-𝑡𝑒𝑟𝑚 𝑔𝑙𝑜𝑏𝑎𝑙 𝑒𝑥𝑝𝑒𝑟𝑖𝑒𝑛𝑐𝑒 𝑎𝑛𝑑 𝑎 ℎ𝑎𝑛𝑑𝑠-𝑜𝑛 𝑎𝑝𝑝𝑟𝑜𝑎𝑐ℎ 𝑎𝑐𝑟𝑜𝑠𝑠 𝑡ℎ𝑒 𝑐𝑜𝑚𝑝𝑙𝑒𝑡𝑒 𝑝𝑟𝑜𝑐𝑒𝑠𝑠.

What is your daily routine for addition of zinc and alloys... like this? 👇 👇 👇

Did you already registered yourself? Time is running out!
𝐡𝐭𝐭𝐩𝐬://𝐰𝐰𝐰.𝐠𝐚𝐥𝐯𝐚𝐧𝐢𝐳𝐢𝐧𝐠𝐞𝐮𝐫𝐨𝐩𝐞.𝐨𝐫𝐠/?𝐬=𝟐𝟎𝟐𝟔

Ten days before the kickstart of 𝟚𝟘𝟚𝟞'𝕤 𝔼𝔾𝔾𝔸 𝔸𝕤𝕤𝕖𝕞𝕓𝕝𝕪, in Istambul

100 Years Anniversary Celebrations of German Galvanizing Association in Berlin.

𝐆𝐚𝐥𝐯𝐚𝐧𝐢𝐳𝐢𝐧𝐠 𝐏𝐫𝐨𝐜𝐞𝐬𝐬 𝐈𝐧𝐬𝐢𝐠𝐡𝐭𝐬 by Herwig GmbH
𝑂𝑓𝑡𝑒𝑛 𝑟𝑒𝑓𝑒𝑟𝑟𝑒𝑑 𝑎𝑠 𝑡ℎ𝑒 ℎ𝑒𝑎𝑟𝑡 𝑜𝑓 𝑡ℎ𝑒 𝑝𝑟𝑜𝑐𝑒𝑠𝑠...

...flux is, without question, a critical step in hot dip galvanizing pre-treatment.

Do it properly, with a good grip on key parameters, and the galvanized quality will be unquestionably high. But when flux control is inconsistent, the consequences quickly become visible:

• Bare spots and adhesion issues
• Increased ash generation
• Excess zinc consumption
• Reduced quality of finished material

Concentration, iron contamination, pH - to name a few key parameters - all play a role in how effectively the flux prepares the steel surface for galvanizing and its contribution for the quality of coating is often a direct reflection of the discipline of its control.

So the question is:
𝗔𝗿𝗲 𝘆𝗼𝘂 𝗿𝗲𝗮𝗹𝗹𝘆 𝗶𝗻 𝗰𝗼𝗻𝘁𝗿𝗼𝗹 𝗼𝗳 𝘆𝗼𝘂𝗿 𝗳𝗹𝘂𝘅𝗶𝗻𝗴 𝗼𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻... 𝗼𝗿 𝗶𝘀 𝗶𝘁 𝗮𝗹𝗼𝗻𝗲 𝗱𝗿𝗶𝘃𝗶𝗻𝗴 𝘁𝗵𝗲 𝗿𝗲𝘀𝘂𝗹𝘁𝘀 𝘆𝗼𝘂 𝗴𝗲𝘁?

𝘏𝘦𝘳𝘸𝘪𝘨 𝘴𝘶𝘱𝘱𝘰𝘳𝘵𝘴 𝘵𝘩𝘦 𝘩𝘰𝘵 𝘥𝘪𝘱 𝘨𝘢𝘭𝘷𝘢𝘯𝘪𝘻𝘪𝘯𝘨 𝘪𝘯𝘥𝘶𝘴𝘵𝘳𝘺 𝘸𝘪𝘵𝘩 𝘭𝘰𝘯𝘨-𝘵𝘦𝘳𝘮 𝘨𝘭𝘰𝘣𝘢𝘭 𝘦𝘹𝘱𝘦𝘳𝘪𝘦𝘯𝘤𝘦 𝘢𝘯𝘥 𝘢 𝘩𝘢𝘯𝘥𝘴-𝘰𝘯 𝘢𝘱𝘱𝘳𝘰𝘢𝘤𝘩 𝘢𝘤𝘳𝘰𝘴𝘴 𝘵𝘩𝘦 𝘤𝘰𝘮𝘱𝘭𝘦𝘵𝘦 𝘱𝘳𝘰𝘤𝘦𝘴𝘴.

This is not the outcome you want with your flux 🫣 👇. It's time to measure, correct and stabilize the process 📧 📧 📧

#herwig #Feuerverzinken #100Jahre

https://lnkd.in/dg4k-Vci

𝐆𝐚𝐥𝐯𝐚𝐧𝐢𝐳𝐢𝐧𝐠 𝐏𝐫𝐨𝐜𝐞𝐬𝐬 𝐈𝐧𝐬𝐢𝐠𝐡𝐭𝐬 by Herwig GmbH
𝑇ℎ𝑒 𝑓𝑖𝑟𝑠𝑡 𝑔𝑒𝑎𝑟 𝑖𝑛 𝑡ℎ𝑒 𝑝𝑟𝑜𝑐𝑒𝑠𝑠

Imagine is Friday afternoon. One of your best customers calls you and asks for an urgent favour: several tons of material, from a project already missing the deadline, to be galvanized still today. “Sure”, you said, after all this request comes from one of your biggest accounts. The material arrives mid-afternoon and the production manager rings you: “this material will cost us the rest of second shift production”. You ask why: “impossible to clean this amount of oil, fast and efficiently”.

Does this sound familiar or is even a common happening at shop floor?Degreasing is, with no doubt, the first gear in the pre-treatment gearbox system – you may want to press gear two but the process will become sluggish no matter how hard you push the pedal. Efficient cleaning of black steel is primordial for a lean pickling, reducing cross contamination and ensuring an optimal fluxing stage, overall reducing quality problems and money waste.

Do you know how good (or bad) is your 𝗮𝗰𝘁𝘂𝗮𝗹 𝗱𝗲𝗴𝗿𝗲𝗮𝘀𝗶𝗻𝗴 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝗶𝗻𝗴?

𝘏𝘦𝘳𝘸𝘪𝘨 𝘪𝘴 𝘢 𝘥𝘦𝘥𝘪𝘤𝘢𝘵𝘦𝘥 𝘴𝘶𝘱𝘱𝘭𝘪𝘦𝘳 𝘰𝘧 𝘵𝘩𝘦 𝘩𝘰𝘵 𝘥𝘪𝘱 𝘨𝘢𝘭𝘷𝘢𝘯𝘪𝘻𝘪𝘯𝘨 𝘪𝘯𝘥𝘶𝘴𝘵𝘳𝘺, 𝘸𝘪𝘵𝘩 𝘢 𝘭𝘰𝘯𝘨-𝘵𝘦𝘳𝘮 𝘦𝘹𝘱𝘦𝘳𝘪𝘦𝘯𝘤𝘦 𝘪𝘯 𝘨𝘭𝘰𝘣𝘢𝘭 𝘮𝘢𝘳𝘬𝘦𝘵𝘴 𝘢𝘯𝘥 𝘩𝘢𝘯𝘥𝘴-𝘰𝘯 𝘢𝘱𝘱𝘳𝘰𝘢𝘤𝘩 𝘧𝘰𝘳 𝘵𝘩𝘦 𝘤𝘰𝘮𝘱𝘭𝘦𝘵𝘦 𝘱𝘳𝘰𝘤𝘦𝘴𝘴.

Talk to us. Together we can review the checklist 📋 of critical points in your degreasing tank.

𝐆𝐚𝐥𝐯𝐚𝐧𝐢𝐳𝐢𝐧𝐠 𝐏𝐫𝐨𝐜𝐞𝐬𝐬 𝐈𝐧𝐬𝐢𝐠𝐡𝐭𝐬 by Herwig GmbH

𝑇ℎ𝑒 𝑐ℎ𝑎𝑙𝑙𝑒𝑛𝑔𝑒 𝑜𝑓 𝑚𝑖𝑠𝑠𝑖𝑛𝑔 𝑝𝑒𝑟𝑓𝑜𝑟𝑚𝑎𝑛𝑐𝑒 𝑖𝑛𝑑𝑖𝑐𝑎𝑡𝑜𝑟𝑠

More often than it should, galvanizers lack the measurement (and therefore control) of performance indicators in the process. These can be as simple as GZU (total zinc consumption), by-products (ash and dross) or consumption of chemicals in pretreatment and energy input into the process.
Consider that not knowing most of these, is like driving with a malfunctioning GPS, knowing the destination but blind to the route, the deviations and the real cost of getting there.

How much of your process is 𝐚𝐜𝐭𝐮𝐚𝐥𝐥𝐲 𝐦𝐞𝐚𝐬𝐮𝐫𝐞𝐝 𝐭𝐨𝐝𝐚𝐲?

𝘏𝘦𝘳𝘸𝘪𝘨 𝘪𝘴 𝘢 𝘥𝘦𝘥𝘪𝘤𝘢𝘵𝘦𝘥 𝘴𝘶𝘱𝘱𝘭𝘪𝘦𝘳 𝘰𝘧 𝘵𝘩𝘦 𝘩𝘰𝘵 𝘥𝘪𝘱 𝘨𝘢𝘭𝘷𝘢𝘯𝘪𝘻𝘪𝘯𝘨 𝘪𝘯𝘥𝘶𝘴𝘵𝘳𝘺, 𝘸𝘪𝘵𝘩 𝘢 𝘭𝘰𝘯𝘨-𝘵𝘦𝘳𝘮 𝘦𝘹𝘱𝘦𝘳𝘪𝘦𝘯𝘤𝘦 𝘪𝘯 𝘨𝘭𝘰𝘣𝘢𝘭 𝘮𝘢𝘳𝘬𝘦𝘵𝘴 𝘢𝘯𝘥 𝘩𝘢𝘯𝘥𝘴-𝘰𝘯 𝘢𝘱𝘱𝘳𝘰𝘢𝘤𝘩 𝘧𝘰𝘳 𝘵𝘩𝘦 𝘤𝘰𝘮𝘱𝘭𝘦𝘵𝘦 𝘱𝘳𝘰𝘤𝘦𝘴𝘴.

Talk to us. We can help you choose the best route 🗺️ for your process 👇

Like dipping steel into a galvanizing kettle, the concept is boiling.
Almost there ⏳ ⏳ ⌛

#herwig #galvanizing #GPIseries

Are you ready for some 𝙂𝙖𝙡𝙫𝙖𝙣𝙞𝙯𝙞𝙣𝙜 𝙋𝙧𝙤𝙘𝙚𝙨𝙨 𝙄𝙣𝙨𝙞𝙜𝙝𝙩𝙨?

#herwig #galvanizing #GPIseries

#stellefrei! Wer kennt geeignete Personen.

Being part of the Spanish galvanizing market makes it also a compromise with the national association ATEG Spanish Galvanizers Association to reinforce our commitment to bring value to the sector.

Looking forward to meet you there.

#herwig #galvanizing #galvanizado #ateg #madrid

We Are Expanding to Saudi Arabia – Local Representative Wanted
To support our growing activities in Saudi Arabia, we are looking for an experienced local representative or agency with strong industry connections.
🔹 Industrial chemicals & process solutions
🔹 Focus on galvanizing, steel & metal industries
🔹 Long-term cooperation with an established European technology partner
👉 Interested in representing proven, high-quality solutions in the Saudi market?
Let’s connect.
🌐 Website: www.herwig-gmbh.com

📩 Please contact us via LinkedIn message or email

Training needs? Process knowledge refresh? Best practices application?

👇🏻👇🏻 Tell us your requirements 👇🏻👇🏻

📨 info @ herwig-gmbh.com


#herwig #galvanizing #training

Visit from the Bundesverband Feuerverzinken e.V. at Dipl.-Ing. Herwig GmbH
It was a great pleasure to welcome Tobias Schäfer, Managing Director of the Bundesverband Feuerverzinken e.V., to our headquarters in Hagen, Germany.
As a long-standing member and active partner of the association, Herwig Galvanizing Technologies is proud to be among the most committed supporters of the hot-dip galvanizing industry. Through extensive employee training programs, intensive on-site technical consulting services in German galvanizing plants, and the supply of high-quality process chemicals and zinc alloys, we have been contributing to the development and strengthening of the galvanizing sector for many years.
We sincerely thank Tobias Schäfer for the valuable and constructive exchange and look forward to continuing our strong and successful cooperation with the Bundesverband Feuerverzinken e.V.
#Galvanizing #HotDipGalvanizing #Zinc #HerwigGalvanizingTechnologies #InnovationMadeInGermany #ZincAlloys #ProcessChemicals #CorrosionProtection #BundesverbandFeuerverzinken

https://lnkd.in/dkBjr4tM

#Hiring – Wir suchen eine:n neue:n Vertriebsmanager in Hagen, North Rhine-Westphalia. Bewerben Sie sich noch heute oder teilen Sie diese Stellenanzeige mit Ihrem Netzwerk.

#Hiring – Wir suchen eine:n neue:n Vertriebsmanager in Hagen, North Rhine-Westphalia. Bewerben Sie sich noch heute oder teilen Sie diese Stellenanzeige mit Ihrem Netzwerk.

Great Show. Come and visit our exhibition stand l.

13TH Asian Pasific General Galvanizing Conference (APGGC).

Looks like a wrap!

#herwig #galvanizing #EGGA #dublin #ireland

We’re excited to join the EGGA - Galvanizing Europe Assembly 2025 in Dublin! 🇮🇪
From June 10–13, leading voices in the galvanizing industry will come together at the iconic Aviva Stadium to discuss sustainability, technology, and the future of galvanized steel.

The programme covers key topics such as:
🔹 EU policy developments
🔹 Corrosion protection in renewables
🔹 Circularity of zinc
🔹 Innovations in galvanizing technology

Oliver Herwig are looking forward to insightful sessions, networking with peers, and visiting local plants.
See you in Dublin!

#Herwig #Galvanizing #Zinc #Alloys #Nickel

Took us a 🔎 while but finally made it to the destination! 📦

As the promised Hot Dip Galvanizing handbook reached the hands of the winner of our 🏆 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼 🏆 , it's now time to disclose its identity 🕵 : from the other side of the ocean SEBASTIAN LORA RUIZ, production manager in a Mexican galvanizing plant, is the 🔥 Galvanizing Expert 🔥 that managed to answer correctly our questions in the first Edition of this Challenge.

Thank you Sebastian for you participation and thank you also to all other participants and followers of this quiz! 🙏 🙏🙏

#herwig #galvanizingchallenge #thewinneris #galvanizing

Happy Easter from the Dipl.-Ing. Herwig GmbH! 🐣✨

This season, we’re especially grateful for the strong partnerships and continued support from our community. Thank you for being part of our journey – your trust keeps our industry galvanized 😉

And remember: searching for Easter eggs is fun, but finding the perfect zinc coating? That’s egg-sactly our specialty. 🥚💪

Wishing you and your loved ones a joyful and relaxing Easter!

#herwig #Zinc #Alloy #Hotdipgalvanizing

If you were already missing 🏆 Herwig's 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼 🏆 , here is the wrap-up for all the questions posted with some brief comments on each one.

In the next days the Galvanizing Expert 🤓 from this series will be announced so stay tuned for fresh news!

#herwig #galvanizingchallenge #galvanizing

Final set for 𝕋ℍ𝔼 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼 and we left the most difficult question for the end of it!
During 12 weeks surveying our 👷 👷‍♀️ Galvanizing Experts around the world in a rushed journey for the Truth behind the process, we close this first season of 𝕋ℍ𝔼 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼 with something important - 🫵 and your participation!

After the poll is closed, the oustanding Galvanizing Expert 🧐 will be contacted by our team in a couple of day but in the meantime bear with us for further updates.

Thanks to all the participants 🤜 🤛 !

#herwig #galvanizingchalleng #galvanizing

🏅 𝕋ℍ𝔼 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼 🏅 is now live!

We've "prepped" the material, ready to dip in molten zinc, emerged as shiny and beautiful as galvanizing can be but around the corner, there's a villain, ready to suck the quality - white rust 🧛!

A nuisance in terms of material quality and a potencial problem if left underlooked, how to handle this (un)natural phenomena?

#herwig #galvanizingchallenge #galvanizing

📚 𝕋ℍ𝔼 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼 📚 - X series

Velocity has its own importance in daily life but in Hot Dip Galvanizing, in particular when dipping steel into the zinc, it can either simplify or complicate galvanizer's life by promoting cleaner finished materials 🪥 🫧 or safer dips for complex geometries 👷‍♂️.

Do you know the answer for this one? 😉

#herwig #galvanizingchallenge #zinc

🔥 𝕋ℍ𝔼 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼 🔥

A relevant parameter in Galvanizing, the temperature 🌡️ of zinc melt can have several consequences, some of them catastrophic: lifetime of kettle, quality of finished materials and viscosity and drainage improvement (for solutions on how Herwig can assist you on this particular click here 👉https://lnkd.in/g-vgmNsX), to name a few.

The hotter 🥵, the better?!

#herwig #galvanizingchallenge #galvanizing

In our business DNA, the support of local galvanizing associations has deep roots, sharing our knowledge and helping its members to achieve the best possible results in terms of operation. In Spain this is no exception.

A great kudos to ATEG Spanish Galvanizers Association for inviting us for this special occasion.

Nos vemos en Málaga!

#herwig #ateg #spain #galvanizado

👨‍🎓 👩‍🎓 𝕋ℍ𝔼 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼 Quiz time!

Without alloying, galvanizing is definitely possible but many advantages are lost: overall zinc consumption and thickness of galvanized layer (for more details on controlling this using our products, check out here 👉 https://lnkd.in/dRWVTnYy), finish and aesthetics of galvanized pieces, ash generation control... to name a few...

#herwig #galvanizingchallenge #galvanizing

It is now time for 7th series of 💡 𝕋ℍ𝔼 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼 💡!

Going straight to our zinc bath, where the magic 🔥 🪄 of transforming black steel into galvanized long-lasting materials, a usual question is addressed when a new project/materials arrives at the galvanizing plant - is it reactive steel? 🤷‍♂️

#herwig #galvanizingchallenge #galvanizing

Sixth row of 𝕋ℍ𝔼 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼 is now online

Odd concept for many, quick answer for others, what in the world is this ⁉️ 🤷 🙋

#herwig #galvanizing #galvanizingchallenge

Good morning everyone!
Time for the fourth row of 𝔾𝕒𝕝𝕧𝕒𝕟𝕚𝕫𝕚𝕟𝕘 ℂ𝕙𝕒𝕝𝕝𝕖𝕟𝕘𝕖 🧐.

Flux is definitely an important step of pre-treatment in galvanizing and, unfortunately, left aside in many galvanizers worldwide. In your opinion and experience... 👇

#herwig #galvanizing #galvanizingchallenge

🏆 𝕋ℍ𝔼 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼 🏆 - 4th series

Give you best on this as the clock just started ticking ⏱️ - do you know the answer?!

#herwig #galvanizing #galvanizingchallenge

Third row of the 𝔾𝕒𝕝𝕧𝕒𝕟𝕚𝕫𝕚𝕟𝕘 ℂ𝕙𝕒𝕝𝕝𝕖𝕟𝕘𝕖 🤓

Do we truly honour the relevance of degreasing in hot dip galvanizing or is it a washing solution before all the *important* pre-treatment steps? 🤨

Press the button!

#herwig #2025 #galvanizing #galvanizingchallenge

𝔾𝕒𝕝𝕧𝕒𝕟𝕚𝕫𝕚𝕟𝕘 ℂ𝕙𝕒𝕝𝕝𝕖𝕟𝕘𝕖 - second round is on!

This seems a simple one, can you name the correct answer 🤔 ?!

#herwig #2025 #galvanizing #galvanizingchallenge

Today we start the first part of 📣 𝕋ℍ𝔼 𝔾𝔸𝕃𝕍𝔸ℕ𝕀ℤ𝕀ℕ𝔾 ℂℍ𝔸𝕃𝕃𝔼ℕ𝔾𝔼.

For 12 weeks 📅 we will have a series of polls related to Hot Dip Galvanizing and our follower with most correct answers will get a free copy of the Handbook of Galvanizing. Only one unique answer per poll ✅ will be admited and the 𝗚𝗮𝗹𝘃𝗮𝗻𝗶𝘇𝗶𝗻𝗴 𝗘𝘅𝗽𝗲𝗿𝘁 🤓 will be contacted at the end of the series.
It is important to stress that only Herwig LinkedIn page followers will be eligible.

Good luck 🍀 !

#herwig #2025 #galvanizing #galvanizingchallenge

Happy New Year,
Happy 2️⃣ 0️⃣ 2️⃣ 5️⃣,
may it be filled with Health, Success and plenty of Galvanizing ⛓️‍🔧🔩⚙️!

Keep an eye on our posts as next week we will have some interesting surprises for this new year!
In the meantime, check our website www.herwig-gmbh.com for what #Herwig can assist at your business either be pre-treatment chemicals, special alloys or dedicated consulting to your process.

#herwig #2025 #galvanizing #specialists

Boost Your Galvanizing Efficiency with HEGA® NAT

Exciting updates from the Kocierz Resort in Poland 🇵🇱! Together with Chem-Protect, we explored market trends, innovative technologies like Nickel Zinc Alloys, and Recycling Processes ♻️ shaping our industry. Thank you to all participants for driving innovation and sustainability forward! #Galvanizing #Herwig #Sustainability #IndustryInsights

Our team mate Marco A. - been aging quite well ladies ans gents - with very interesting presentations and discussion panels, a unique visit to oldest zinc refinery in the world, having a unique apple pie and apple cider and enjoying himself at Closing Dinner where 2024 Sorel award winners were know.

As some work had to be done, also managed in between to catch up with the Australian and New Zealand galvanizers, meeting old friends and customers.

How we envy him here in continental Europe 😁!

#herwig #australia #hotdipgalvanizing

We had an incredible time at #TECHFORUM24 in Omaha! It was a fantastic opportunity to connect with key players in the #hotdipgalvanizing industry across North America. Thank you to everyone who visited us at Booth No. 1. We enjoyed discussing our offerings, from pre-treatment chemicals to tailored nickel alloying and flux treatment. Looking forward to future collaborations!

#herwig American Galvanizers Association

Looking forward to see you next week at our booth No 1. We have some existing new innovative products for the #galvanizing industry to offer.

🚀 Team Herwig is excited to attend *TechForum 2024* in Omaha 🇺🇸 !

This event promises to bring the best of industry knowledge and networking, with a packed schedule that dives deep into galvanizing processes, pretreatment technologies, and safety practices.

Looking forward to connecting with industry leaders, learning about the latest innovations, and enjoying networking opportunities. See you in
Omaha! 👋

#TechForum2024 #Galvanizing #Zinc #Alloys #Herwig

Did you know that...

𝘿𝙞𝙥𝙡.- 𝙄𝙣𝙜. 𝙃𝙚𝙧𝙬𝙞𝙜 𝙂𝙢𝙗𝙃 performs several training sessions related the best practices of our industry, in-house for our customers?

Our dedicated team prepares and delivers customised sessions, according to each galvanizer requirements, valuable in theoretical information and practical cases, in order to improve the galvanizing process and refresh overall operation procedures whenever needed.

Want to know more about these?
Just message us below 👇🏻👇🏻👇🏻

Amazing event and massive feedback!

Cheers to everyone that shown up to meet and greet, look forward to see you again.

#herwig #galvanizing #intergalva2024

Day 1 at #Intergalva2024 and 𝗗𝗶𝗽𝗹.-𝗜𝗻𝗴. 𝗛𝗲𝗿𝘄𝗶𝗴 𝗚𝗺𝗯𝗛 assembled at 🇧🇪 Bruges Conference Center.

Busy day with a lot of old and new faces, gathering together for this important event of Hot Dip Galvanizing industry.

Visit us and put your football shoes to give your best for goal scoring at our booth! Best strikers will earn a prize!

#Herwig #Intergalva #hotdipgalvanizing

🌟 Join Us at Intergalva 2024! 🌟
We are thrilled to announce that we will be once again exhibiting at Intergalva, the leading event for the Hot Dip Galvanizing Industry, this time taking place in the beautiful location of Bruges, Belgium. This show is an incredible opportunity to connect with industry professionals, discover the latest innovations, and gain valuable insights.
Visit us at booth 13 to find out what special surprises we have for you this year, Dipl.-Ing. Herwig team will be in person to meet and discuss how we can support your business, improve your process and answer any questions you may have.
Don’t miss out on this fantastic opportunity to network and explore the future of Hot Dip Galvanizing. We look forward to seeing you there!
#Intergalva2024 #Galvanizing #Herwig #Networking #Innovation #Technology

Hinter uns liegen zwei inspirierende Tage mit Besichtigungen zur Kesselfertigung bei der Firma W. Pilling betonte die Bedeutung des Wissensaustauschs für die Branche. Vielen Dank an die Gastgeber, Referenten und Teilnehmer für ihre Beiträge! #Feuerverzinkung #Technologie #Innovation #Workshop #Zink

Happy Easter to our dear customers and the LinkedIn community in the hot dip galvanizing industry! 🐣🌷

May this time of renewal bring you joy, growth, and success. Let's keep building strong partnerships and striving for the highest quality standards together.

Happy Easter from the Dipl.-Ing. Herwig GmbH family!

#EasterWishes #GalvanizingCommunity #QualityPartnerships #zinc #hotdipgalvanizing

Introducing our degreasing agents tailored for hot-dip galvanizing!

✅ Efficient Cleaning: Swiftly and thoroughly clean metal surfaces for optimal galvanizing.

✅ Environmentally Friendly : Our eco-friendly formulations prioritize sustainability without compromising effectiveness.

✅ Use Results: Prepare surfaces for top-notch galvanizing with our advanced degreasing solutions.

At Dipl.-Ing. Herwig GmbH, we're dedicated to modern manufacturing needs, ensuring immaculate galvanized surfaces and sustainable practices. Let's shape a cleaner, greener future together!

#HotDipGalvanizing #Global #Zinc #Degreaser #Herwig #ecofriendly

Dear LinkedIn Community,

We are thrilled to kick off a new series where we delve into the exceptional products that make Herwig GmbH a leader in the industry. 🌎

Today, we shine the spotlight on our wide-ranging line-up of fluxes, specifically tailored for the Hot Dip galvanizing industry.
This innovative product ensures superior performance and efficiency in the galvanization process, meeting the stringent requirements of the industry.

Join us on this journey as we unfold the layers of our diverse product offerings, providing you with insights into the expertise and quality that define Herwig GmbH.
Stay tuned for more updates, and feel free to reach out for any inquiries or further information. Your success is our priority!

#Herwig #GalvanizingIndustry #Flux #QualityProducts #ManufacturingExcellence #Zinc

Elevate Your Galvanizing Game with Dipl.-Ing. Herwig GmbH!

Why choose Dipl.-Ing. Herwig GmbH?

🚀 Cutting-edge Technology: Our fluxes are formulated with the latest technological advancements to meet and exceed industry standards.

🌈 Bright Range: Explore a spectrum of options tailored to your specific galvanizing needs. From standard applications to specialized projects, we've got you covered!

🌍 Global Reach: Based in Hagen, Germany, we serve clients worldwide. Wherever your project is, we're ready to provide reliable and efficient solutions.

🤝 Trusted Expertise: With years of experience, we've established ourselves as a leading force in the hot dip galvanizing sector. Our team of experts is committed to delivering excellence.

📈 Continuous Innovation: We believe in constant improvement. Stay ahead of the curve with our innovative flux formulations designed for superior performance.

📣 Ready to take your galvanizing process to the next level? Connect with us today to explore the possibilities and experience the Dipl.-Ing. Herwig GmbH difference on our Homepage www.herwig-gmbh.com

#Galvanizing #CorrosionProtection #Herwig #Innovation #Zinc #HotDipGalvanizing #IndustryLeadership

Exciting News! 

We are thrilled to announce that Dipl.-Ing. Herwig GmbH is now a proud member of the ZINK Initiative a dynamic community of industry experts

This step allows us to further strengthen our commitment to innovation and sustainable practices. We firmly believe that collaborating with members of the ZINK Initiative will lead to exciting new developments in our industry.

#Herwig #ZINKInitiative #IndustryInnovation #Sustainability #Collaboration #Galvanizing #Zinc

🎄✨ Wishing You a Merry Christmas and a Galvanized New Year! 🌟

As the holiday season approaches, we want to extend our warmest wishes to all our valued customers and partners in the hot dip galvanizing industry. 🎅🤶 Your trust and partnership have been the key to our success, and we are grateful for the opportunities to serve you throughout the year.

May this festive season bring you joy, peace, and prosperity. 🎁 As we look back on the challenges and achievements of the past year, we're excited about the opportunities that the coming year holds for collaboration and growth. Together, let's continue to build a future that's strong, durable, and corrosion-resistant! 💪

#MerryChristmas #HappyHolidays #GalvanizingSuccess #SeasonsGreetings #StrongerTogether #HotDipGalvanizing #CorrosionProtection #NewYearNewOpportunities #BuildingTogether #GalvanizedWishes #IndustryCheers

Thank you for being part of our journey. Here's to a galvanized and successful 2024! 🌐🎉

Warm regards,
The Herwig Team

Dipl.-Ing. Herwig GmbH blickt zurück auf einen erfolgreichen Technischen Workshop in Dipperz!
Wir Danken dem Industrieverband Feuerverzinken e.V. und allen Teilnehmern für die Interessanten Vorträge, sowie exzellente Fachgespräche.


#Feuerverzinken #Galvanizing #Zinc #Flux #ZincAlloys #HotDipGalvanizing

Great that our team is present on this important #galvanizing #event! Come and visit us @ #Latingalva2023

The 7th China International Hot Dip Galvanizing Symposium & Exhibition 2023 took place this week in Qingdao, Shandong China.

The biennial China International Hot Dip Galvanizing Conference and Exhibition is one of the most influential hot dip galvanizing conferences in the world 🌏 .

It was a great opportunity for Dipl.-Ing. Herwig GmbH to be a part of this excellent Event 👍 .
Once again, a big Thank you to Mr. Tony Tong and his team from IZA China.

#Herwig #Galvanizing #China #Chinagalvanizing #Zincalloys #Degreasing #Hotdipgalvanizing #Qingdao #Zinc #Flux #IZAChina

Important presentations and discussions held recently at VI Worshop Galvanização a Fogo promoted by ABRACO - Associação Brasileira de Corrosão, São Paulo - Brazil.

#herwig #hdg #galvanizacao #galvanizing #brazil

Thumbs up to Marco A. team commitment and support to this industry.

#herwig #galvanizing #brazil

Viele spannende Vorträge, interessanter Austausch, nettes Beisammensein und neue Erkenntnisse rund um das Thema Feuerverzinken.

Das GAV-Forschungskolloquium 2023 in Hannover war ein voller Erfolg, wir freuen uns ein Teil der Veranstaltung gewesen zu sein!

#herwig #feuerverzinken #zink #hannover

Doesn't it feel that someone wants to become a regional sales manager for South Pacific?!?

🤔😅😆

#herwig #hdg #galvanizing #australia #newzealand

Still hit hard by jet lag, Marco A.. A terrific panel of speakers it set, coming from several backgrounds but all related to our industry, setting the bar quite high for the outcome of the event.

The event will be held in São Paulo on 18th October.

More details on the post below.

#herwig #hdg #galvanizacaoafogo #brazil

https://lnkd.in/eSKz7gD9

https://lnkd.in/g5qE4kSY

Last week Klaudia Westphal for this excellent organization. See you next year!



#herwig #galvanizing #zinc #hotdipgalvanizing #newtechnologies

Marco A. is flying long distance this time to represent #Herwig during annual #GAA meeting, this year with a special landmark - the celebrating of Association's 60th anniversary.

Aside mingling with Australian and New Zealand galvanizers, he will be also presenting a talk on the challenging days that European counterparts live.

Godspeed and tail winds!

#herwig #galvanizing #perth #GAA

No lo pierdan!

#herwig #galvanizado #latingalva2023 #peru

Muy pronto en Peru!

#Herwig estará presente y hablando en las ponencias, de los retos que la industria de galvanizado europea tiene por delante en los tiempos de hoy.

#galvanizado #iza #latingalva2023 #hdg

Marco A. gave an exciting presentation, by invitation of #ILZDA on actual and future challenges of hot dip galvanizing industry, covering worldwide geography.

As stated by Albert Einstein once, "In the middle of difficulty lies opportunity'", meaning that any challenge can be seen as opportunity of growth and development and this is no exception to our industry!

#herwig #hdg #galvanizing #india

Our Team and Management is thankful for the support received during its #galvanizing round trip im South East Asia.

#EGGA Assembly took place at a historical Hotel, right in the heart of beautiful Salzburg. #Herwig team took the opportunity to resume talks and reencounter customers and friends at the event.

We hope everyone enjoyed the great time in Austria, with interesting presentations on sustainability for HDG industry during the conference time and, needless to say, a very pleasant night during Gala Dinner. Least not important, the plant visit tours arranged by #EGGA for this Assembly.

#EGGA2023, #Herwig Team is on the road again. See you from Sunday to Wednesday in Salzburg. Please come and visit our booth.

Working & Learning to create a better environment.

Thanks for stopping at our booth my friends. Great to meet in person again.

Finally I met our Indonesian friends again. Thanks for visiting our booth in Yokohama, Japan.

Namaste! 🇳🇪

https://lnkd.in/d-Pbmynt

We are very proud to have this kind of feedback. This is what motivates us each single day in our business.

#herwig #galvanizing #india #humanrelationsmatters

#HERWIG #Galvanizing Technologies is happy to exhibit at the 12. Asia Pacific General #Galvanizing #Conference. Come and visit our booth No. 21. Our professionals, Patrick Siepe are welcoming you for in-depth technical conversations and fruitful networking sessions.
Together with our domestic Japanese team members, we ensure all participants an imperceptible service.

See you in #Yokohama 🇯🇵

Amazing feedback at FEDIMETAL presented some of the new challenges of HDG industry in Europe.

Thank you for all attendees (live and online) and also for tremendous feedback during the same! Also our very special thank you to FEDIMETAL for the opportunity.

#herwig #hdg #galvanizado #galvanizing #fedimetal #galvalatina #latinamerica #ecuador

Marco A. to whom we are thankful.

Will these matters also be a challenge, in Latinamerica, in a very short term?

#herwig #latinamerica #galvanizado #fedimetal #galvalatina #ecuador

Con los nuevos retos que se presentan actualmente en Europa, un panel de discusión seguramente muy interesante!

Ahí estaremos!

#herwig #hdg #galvanizado #ateg

Herwig on the Christmas Market and our typical Feuerzangenbowle 🎄
wishing all a wonderful Christmas time 🎅🏻

#weihnachtsmarkt #herwig #hotdipgalvanizing

Some plans for 2023, unveiling 😉😃

#herwig #galvanizado #latinamerica #hotdipgalvanizing

#herwig #galvanizing #Australia

https://lnkd.in/dkjwW5X2

While Oliver Herwig are joining the TechForum2022 in Hartford

on the other end of the globe 🌍 Klaudia Gorajek just finished

the THE 27th HOT-DIP GALVANIZING CONFERENCE of the Czech and Slovak Galvanizers Association in Trnava.

We heard a lot of fantastic presentations and had the opportunity to introduce our newest technology! Thank you for the very interesting exchange!

#galvanizing #herwig #technology

All is set and ready to go for #AGA's #Techforum 2022 at Hartford, Connecticut.

#herwig #galvanizing #usa #hartford #connecticut

Guess where is Herwig team at!?!!

#herwig #galvanizing #enjoyingthesunday

Together with the wonderful staff and members of #Zinc info Benelux, Oliver #Herwig and Klaudia Gorajek were delighted to take part in the 70th Anniversary celebrations of the Benelux association.

It was an honour for Dipl.- Ing. #Herwig GmbH to present a technical paper about Novell Alloying Technologies for the #galvanizing industry in front of the professional audience.

Thanks to Evi for the great organisation. See you next year. 
#benelux #hotdipgalvanizing

Let’s meet in the USA! 🇺🇸

#herwig #hotdipgalvanizing #allovertheworld 🌎

Finally #Herwig team had the opportunity to reunite live with worldwide customers and friends in a very successful #Intergalva2022 🇮🇹 .

Thank you for stopping by at #Herwig 🇩🇪 booth - was great to see you again and we hope you had a great time and all topics covered were of great interest.

Only 2 days left to win our Golf competition with great prizes! Join us and get a golf lesson from a Pro. #Herwig #Intergalva2022

First day of the #Intergalva2022 it was amazing to see all the old and new friends of the #hotdipgalvanizing family come and visit us at booth 7! Join our Golf competition and win 🏆 some great prizes!

#Herwig is warming up in #Rome we are ready for #Intergalva2022 and started our trip with exploring Frascati. The #herwigteam is excited to meet everyone on Monday! 🇮🇹 🇩🇪